Report an error to the user, but allow the current splice's computation to carry on. To abort the computation, use fail.

Report a warning to the user, and carry on.

Report an error (True) or warning (False), but carry on; use fail to stop.

Recover from errors raised by reportError or fail.

The location at which this computation is spliced.

The runIO function lets you run an I/O computation in the Q monad. Take care: you are guaranteed the ordering of calls to runIO within a single Q computation, but not about the order in which splices are run.

Note: for various murky reasons, stdout and stderr handles are not necessarily flushed when the compiler finishes running, so you should flush them yourself.

reify looks up information about the Name.

It is sometimes useful to construct the argument name using lookupTypeName or lookupValueName to ensure that we are reifying from the right namespace. For instance, in this context:

data D = D

which D does reify (mkName "D") return information about? (Answer: D-the-type, but don't rely on it.) To ensure we get information about D-the-value, use lookupValueName:

do
  Just nm <- lookupValueName "D"
  reify nm

and to get information about D-the-type, use lookupTypeName.

reifyModule mod looks up information about module mod. To look up the current module, call this function with the return value of thisModule.

Obtained from reify in the Q Monad.

Obtained from reifyModule in the Q Monad.

InstanceDec desribes a single instance of a class or type function. It is just a Dec, but guaranteed to be one of the following:

• InstanceD (with empty [Dec])
• DataInstD or NewtypeInstD (with empty derived [Name])
• TySynInstD

In ClassOpI and DataConI, name of the parent class or type

In UnboxedSumE and UnboxedSumP, the number associated with a particular data constructor. SumAlts are one-indexed and should never exceed the value of its corresponding SumArity. For example:

• (#_|#) has SumAlt 1 (out of a total SumArity of 2)
• (#|_#) has SumAlt 2 (out of a total SumArity of 2)

In UnboxedSumE, UnboxedSumT, and UnboxedSumP, the total number of SumAlts. For example, (#|#) has a SumArity of 2.

In PrimTyConI, arity of the type constructor

In PrimTyConI, is the type constructor unlifted?

The language extensions known to GHC.

Note that there is an orphan Binary instance for this type supplied by the GHC.LanguageExtensions module provided by ghc-boot. We can't provide here as this would require adding transitive dependencies to the template-haskell package, which must have a minimal dependency set.

List all enabled language extensions.

Determine whether the given language extension is enabled in the Q monad.

Look up the given name in the (type namespace of the) current splice's scope. See Language.Haskell.TH.Syntax for more details.

Look up the given name in the (value namespace of the) current splice's scope. See Language.Haskell.TH.Syntax for more details.

reifyFixity nm attempts to find a fixity declaration for nm. For example, if the function foo has the fixity declaration infixr 7 foo, then reifyFixity 'foo would return Just (Fixity 7 InfixR). If the function bar does not have a fixity declaration, then reifyFixity 'bar returns Nothing, so you may assume bar has defaultFixity.

reifyType nm attempts to find the type or kind of nm. For example, reifyType 'not returns Bool -> Bool, and reifyType ''Bool returns Type. This works even if there's no explicit signature and the type or kind is inferred.

reifyInstances nm tys returns a list of visible instances of nm tys. That is, if nm is the name of a type class, then all instances of this class at the types tys are returned. Alternatively, if nm is the name of a data family or type family, all instances of this family at the types tys are returned.

Note that this is a "shallow" test; the declarations returned merely have instance heads which unify with nm tys, they need not actually be satisfiable.

• reifyInstances ''Eq [ TupleT 2 `AppT` ConT ''A `AppT` ConT ''B ] contains the instance (Eq a, Eq b) => Eq (a, b) regardless of whether A and B themselves implement Eq
• reifyInstances ''Show [ VarT (mkName "a") ] produces every available instance of Eq

There is one edge case: reifyInstances ''Typeable tys currently always produces an empty list (no matter what tys are given).

Is the list of instances returned by reifyInstances nonempty?

reifyRoles nm returns the list of roles associated with the parameters of the tycon nm. Fails if nm cannot be found or is not a tycon. The returned list should never contain InferR.

reifyAnnotations target returns the list of annotations associated with target. Only the annotations that are appropriately typed is returned. So if you have Int and String annotations for the same target, you have to call this function twice.

Annotation target for reifyAnnotations

reifyConStrictness nm looks up the strictness information for the fields of the constructor with the name nm. Note that the strictness information that reifyConStrictness returns may not correspond to what is written in the source code. For example, in the following data declaration:

data Pair a = Pair a a

reifyConStrictness would return [DecidedLazy, DecidedLazy] under most circumstances, but it would return [DecidedStrict, DecidedStrict] if the -XStrictData language extension was enabled.

Represents an expression which has type a. Built on top of Exp, typed expressions allow for type-safe splicing via:

• typed quotes, written as [|| ... ||] where ... is an expression; if that expression has type a, then the quotation has type Q (TExp a)
• typed splices inside of typed quotes, written as $$(...) where ... is an arbitrary expression of type Q (TExp a)

Traditional expression quotes and splices let us construct ill-typed expressions:

>>> fmap ppr $ runQ [| True == $( [| "foo" |] ) |]
GHC.Types.True GHC.Classes.== "foo"
>>> GHC.Types.True GHC.Classes.== "foo"
<interactive> error:
    • Couldn't match expected type ‘Bool’ with actual type ‘[Char]’
    • In the second argument of ‘(==)’, namely ‘"foo"’
      In the expression: True == "foo"
      In an equation for ‘it’: it = True == "foo"

With typed expressions, the type error occurs when constructing the Template Haskell expression:

>>> fmap ppr $ runQ [|| True == $$( [|| "foo" ||] ) ||]
<interactive> error:
    • Couldn't match type ‘[Char]’ with ‘Bool’
      Expected type: Q (TExp Bool)
        Actual type: Q (TExp [Char])
    • In the Template Haskell quotation [|| "foo" ||]
      In the expression: [|| "foo" ||]
      In the Template Haskell splice $$([|| "foo" ||])

Underlying untyped Template Haskell expression

An abstract type representing names in the syntax tree.

Names can be constructed in several ways, which come with different name-capture guarantees (see Language.Haskell.TH.Syntax for an explanation of name capture):

• the built-in syntax 'f and ''T can be used to construct names, The expression 'f gives a Name which refers to the value f currently in scope, and ''T gives a Name which refers to the type T currently in scope. These names can never be captured.
• lookupValueName and lookupTypeName are similar to 'f and ''T respectively, but the Names are looked up at the point where the current splice is being run. These names can never be captured.
• newName monadically generates a new name, which can never be captured.
• mkName generates a capturable name.

Names constructed using newName and mkName may be used in bindings (such as let x = ... or x -> ...), but names constructed using lookupValueName, lookupTypeName, 'f, ''T may not.

Generate a capturable name. Occurrences of such names will be resolved according to the Haskell scoping rules at the occurrence site.

For example:

f = [| pi + $(varE (mkName "pi")) |]
...
g = let pi = 3 in $f

In this case, g is desugared to

g = Prelude.pi + 3

Note that mkName may be used with qualified names:

mkName "Prelude.pi"

See also dyn for a useful combinator. The above example could be rewritten using dyn as

f = [| pi + $(dyn "pi") |]

Generate a fresh name, which cannot be captured.

For example, this:

f = $(do
  nm1 <- newName "x"
  let nm2 = mkName "x"
  return (LamE [VarP nm1] (LamE [VarP nm2] (VarE nm1)))
 )

will produce the splice

f = \x0 -> \x -> x0

In particular, the occurrence VarE nm1 refers to the binding VarP nm1, and is not captured by the binding VarP nm2.

Although names generated by newName cannot be captured, they can capture other names. For example, this:

g = $(do
  nm1 <- newName "x"
  let nm2 = mkName "x"
  return (LamE [VarP nm2] (LamE [VarP nm1] (VarE nm2)))
 )

will produce the splice

g = \x -> \x0 -> x0

since the occurrence VarE nm2 is captured by the innermost binding of x, namely VarP nm1.

The name without its module prefix.

Examples

>>> nameBase ''Data.Either.Either
"Either"
>>> nameBase (mkName "foo")
"foo"
>>> nameBase (mkName "Module.foo")
"foo"

Module prefix of a name, if it exists.

Examples

>>> nameModule ''Data.Either.Either
Just "Data.Either"
>>> nameModule (mkName "foo")
Nothing
>>> nameModule (mkName "Module.foo")
Just "Module"

A name's package, if it exists.

Examples

>>> namePackage ''Data.Either.Either
Just "base"
>>> namePackage (mkName "foo")
Nothing
>>> namePackage (mkName "Module.foo")
Nothing

Returns whether a name represents an occurrence of a top-level variable (VarName), data constructor (DataName), type constructor, or type class (TcClsName). If we can't be sure, it returns Nothing.

Examples

>>> nameSpace 'Prelude.id
Just VarName
>>> nameSpace (mkName "id")
Nothing -- only works for top-level variable names
>>> nameSpace 'Data.Maybe.Just
Just DataName
>>> nameSpace ''Data.Maybe.Maybe
Just TcClsName
>>> nameSpace ''Data.Ord.Ord
Just TcClsName

Tuple type constructor

Tuple data constructor

Unboxed tuple type constructor

Unboxed tuple data constructor

Unboxed sum type constructor

Unboxed sum data constructor